How To Put Watch Links Back On. At this stage you can determine if you need to remove more links from the watch band. Before i acquired my backpress if i had a tight back i used to put the watch crystal down on a newspaper then use a small about 40mm x 40mm piece of soft pine place it on the back and press down with the palm of my hand of course this would only work with flat mineral crystal and not with domed acrylic.
The pins fit back in one way with the tip going in first. Place a pin through the hole attaching the new link to the band. After all desired links are removed put the pins back in the pinhole from the same side of the link that you removed them from.
Place the watch band back in the holder to keep it steady and push the pin down to make sure you have reached the threaded portion of the link.
With the band back together and before you remove any more links on the other side of the band put your watch back on and check to see how it fits. Lay the watch back down. With the band back together and before you remove any more links on the other side of the band put your watch back on and check to see how it fits. To see if your watch has end caps look at the space between the lugs.
